TMFL25 Shaun Mason is going to fire up the Mumble server for us on Sunday to use, here is what you need to do to get up and running: 1. Install the Mumble client on your device. You need to download the client for your device: http://sourceforge.net/projects/mumble/ Once it's downloaded, install it. It will walk you through setting up audio during this installation. It's not the most intuitive thing, but you should be able to figure it out. 2. Connect to the TSO server. Start Mumble Add New Fill out the form: Label: TSO Address: 22.214.171.124 Port: 64738 Name: [Your Name] Password: ts0iss1m (That's TEE-ESS-ZERO-EYE-ESS-ESS-ONE-EMM) Click OK Click on the Server you just added, click connect. At this point, you should be connected. If you have any problems, post in this thread and I will help you.